Accessories

• Expansion module - CZ6

  CZ6 is an external interface designed to increase the number of GSM module GT7, GT10 and IP module ET7 inputs up to 6.

• Expansion module - CZ8

  The 8-input Expansion Module CZ8 is an interface between the GSM control panel CG3 and any hardwired detection devices. The CZ8 is connected to common bus of the control panel to provide eight additional hardwired inputs.

• iBC804 iButton (Maxim - Dallas)

  The iBC804 iButton (Maxim - Dallas) module makes it very easy to utilize the 8 zone GSM SPG804 security control panel features. Its very easy to install, handle and it gives clear indication of system status.

• IP alarm transmitter VBIP

  

  The VBIP Module can be used to connect any control panel, with telephone communicator, supporting Contact ID format, to the local network (LAN) or internet (WAN), and report the control panel events to the monitoring station via the IP network.

• Wireless sensor Pir 868

  

  GsmPir 868 is a wireless device with integrated motion detector for use as part of the Gsm Pir and Ultima PRO wireless security system.

• Contact ID module - C11

  

  C11 is an external interface for GSM module GT7, GT10 and IP module ET7, designed to receive data from telephonic communicator of a control panel.

  Input in DTMF signals and in Contact ID protocol.

• Esprit 646

  24-Zone LED Keypad for GsmAlarm-220

• Magellan K10V

  10-Zone vertical LED Keypad for GsmAlarm-CG2/CG3

• Contact ID module - C14

  C14 is an external interface applied for interconnecting modules ET7, GT7 and GT10 with the output TIP-RING of control panel. Input in DTMF signals and in Contact ID protocol.

• Ultima KB

  Ultima KB keyboard to connect to Gsm Ultima / Ultima PRO console.

• Magellan K10H

  10-Zone horizontal LED Keypad for GsmAlarm-CG2/CG3

• IP module E2

  

  IP module E2 is designed for information transfer from the object to the central monitoring station via internet communication channels. Information is being transfered by using TCP/IP protocol. Structure of a message corresponds to Contact ID protocol.

• RTD-02

  Temperature sensor RTD-02
  
  User/Installation manual

• RMA-02

  

  External microphone RMA-02

• RR-63RT Radioreceiver

  Radioreceiver RR-63RT basically is a concentrator, which collects information from 63 objects. Each object has the unique address. Receiver - concentrator has its own unique address as well, which allows to connect several receivers to one transmitter.

• RT4-5a/63 transmitter

  Transmitter RT4-5a/63 is designed for collecting information about guarded object, its processing and further transmission via radio channel to the receiving device RR-63RT.

• RT4-5m/63 transmitter

  Transmitter RT4-5m/63 is designed for collecting information about guarded object, its processing and further transmission via radio channel to the receiving device RR-63RT.

• CPRC-3D/RT Control panel

  Control panel CPRC-3D/RT is a 3-zone system with integrated transmitter. Maximal number of registered users for one panel is 15. It is possible to connect a siren. There is a power supply control, accumulator control, control of loop resistance (EOL).

• CPRC-8D/RT Control panel

  Control panel with integrated transmitter CPRC-8D/RT is designed to use on the guarded object. The panel is controlled by electronic keys produced by Dallas Semiconductors Company, Proximity cards and Keypad-DS. Maximal number of registered users' keys is 15 for each partition. It is possible to connect a siren. There is a power supply control, accumulator charge control, control of loop resistance (EOL).

• TX-63/RT Transmitter

  The transmitter TX-63/RT is used to integrate control panels produced by other producers in RS-63RT system, which provides the following transmissions:
  • 3 types of alarm signals;
  • Status signals (armed/disarmed);
  • Messages about system troubles (AC power loss, if transmitter's power supply voltage lower critical level).

• IM-8 Indication module

  Indication module IM-8 is designed to display the conditions of the objects, guarded by RS-63VHF and/or RS-63RT system.

• Software WinSC-63VHF

   WinSC-63RT is a program product designed to work in operational system Windows 9X/2000/XP together with the receiving device RR-63RT.