GSM SPG804

Probably the first control panel which allows IP Camera control full GPRS and IP communication with PSTN, DATA and SMS backup.

Could be used as stand alone wired or wireless panel or as communication gateway for any security control panel with DTMF Contact ID or 4/2 format.

Main features

TCPIP
GPRS
MODEM
SMS
PSTN -PSTN backup possibility (If LAN, GSM fails than connected security panel could dial out on normal tel line) also for up and downloading existing control panels
Modem data call (If LAN, GPRS can not get through, it can use GSM data services)

Compatible with all existing communicatior security intruder control panels (DTMF CID, 4/2);
On board zones and outputs could be used as expander module of any control panel, connected to it;
Expansion with 32 RF devices (Inovonics 868MHz wireless *);
Fully functional stand alone control panel by itself with 8 hardwire, 32 RF zones;
E-mail sending;
Automatic SMS sending;
SMS commanding;
Full alarm features with several input types (Follower, immediate, 24h, tamper, technical, stay.);
Stay and Away mode arming;
4 programmable output (open collector);
Outputs could be triggered remotely by any internet browser, or ETMS software;
Web programmable, no need for special modem or installed programming software;
Remotely accessible web diagnostics;
4 user web access on adjustable authority level;
8 IP Camera control (Start, Stop recording in the cam own memory, Send to FTP server functions);
Telephone handset could be connected to the PHONE connector to initiate and receive phone calls through GSM voice;
Remote firmware upgradable;
Optional Serial port plug on panel (RS232, 485);
Optional Laudspeaker and Mic amplifier plug on panel.

Technical specification